Shay
Non-standard size:
Special sizes are produced according to customers' drawings or technical parameters.
Stainless Steel Mesh Oil Filter Element 24.4x36.4
Product Specifications
Huahang
Type
Stainless Steel oil filter element
Filter layer
Stainless steel mesh
Filtration rate
40 micron
dimension
24.4x36.4 mm
Package
Neutral carton package
Type |
Stainless Steel oil filter element |
Filter layer |
Stainless steel mesh |
Filtration rate |
40 micron |
dimension |
24.4x36.4 mm |
Package |
Neutral carton package |
how to choose stainless steel filter
HUAhANG
Filtration accuracy
High-quality stainless steel oil filter elements must have high filtration accuracy and can effectively intercept impurity particles below 20 microns to prevent tiny particles from entering the equipment and causing wear.
Material and corrosion resistance
Preferred materials are 304, 316 or 316L stainless steel, which are resistant to high temperature and corrosion and suitable for harsh working conditions.
Structure and diameter
The filter element structure must ensure smooth passage of oil, and the inlet and outlet diameters should be consistent with the inlet diameter of the pump to avoid affecting the system pressure.
Pressure level
Select the filter element pressure level according to the maximum working pressure of the system to ensure stable operation under high pressure.
Resistance loss
The pressure loss under actual working conditions needs to be calculated, and the number of filter elements should be increased if necessary to reduce the overall resistance.
1. Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
0110R003BNHC 0110R005BNHC 0110R010BNHC 0110R020BNHC
0110R003BN3HC 0110R005BN3HC 0110R010BN3HC 0110R020BN3HC
0110R003BN4HC 0110R005BN4HC 0110R010BN4HC 0110R020BN4HC 2. Acid cleaning method
Dissolve potassium dichromate or crystals in water to 60 to 80 degrees, and slowly add concentrated sulfuric acid with a concentration of 94% until sufficient. Add slowly and stir. Add up to 1200 milliliters of potassium sulfate or completely dissolve, and the solution will appear dark red in color. At this time, the rate of adding concentrated sulfuric acid can be accelerated until it is completely added. If there are still undissolved crystals after adding concentrated sulfuric acid, they can be heated until dissolved. The function of cleaning solution is to remove general pollutants, grease, and metal particle impurities on the wall of stainless steel filter cartridge, and it can effectively kill the bacteria and microorganisms that grow on the filter cartridge and damage the heat source. If the filter element has been alkaline washed before, the alkaline solution must be washed first, otherwise fatty acids will precipitate and contaminate the filter element.
Size And Specification Customization
-
-
Standard part number
We can produce according to the standard models you provide
Material Customization
-
Different materials:
There are several materials such as glass fiber, oil filter paper, air filter paper, non-woven fabric, polyester cloth and stainless steel mesh, which can be selected according to customer requirements and working conditions.
-
End Caps Customization
-
Material of end caps:
End cap material types include: carbon steel, stainless steel, aluminum, ABS, nylon, plastic
-
Connection mode and structure optimization
-
Connection types:
Interface types include: threaded interface, snap-in interface, 222/226 interface, flange interface, flat seal interface, and Pagoda head interface.
-
