Leave Your Message
Products Categories
Featured Products

SH62129 Stainless Steel Mesh Oil Filter Element

This oil filter has strong filtering ability, which can effectively capture impurities such as dirt, debris, and metal particles, prevent engine damage, and extend the service life of the oil. It fits snugly against your oil filter housing, making it easy to install and a reliable and convenient choice for maintaining engine health.

    Product SpecificationsHuahang

    Part number

    SH62129

    Filter layer

    Stainless steel mesh

    Filtration accuracy

    1~50μm

    Working temperature

    -10~+100℃

    SH62129 Stainless Steel Mesh Oil Filter Element


    features
    HUAhaNG


    1. Excellent filtration performance, with uniform surface filtration performance for filter particle sizes ranging from 2-200um
    2. Good corrosion resistance, heat resistance, pressure resistance, and wear resistance;
    3. The stainless steel filter element has uniform and precise filtering accuracy with air holes;
    4. The flow rate per unit area of the stainless steel filter element is large;
    5 stainless steel filter cartridges are suitable for low and high temperature environments; After cleaning, it can be reused without replacement.





    1. Special design can achieve an effective filtration area of 100%;


    2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;


    3. The design adopts a metal folding frame, which can be reused and replaced;


    4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;

    Special design can achieve an effective filtration area of 100%;


    2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;


    3. The design adopts a metal folding frame, which can be reused and replaced;


    4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;



                               related part number

    SH 54510,   SH 54540,   SH 54100,   SH 54661,
    SH 69006,   SH 69355,   SH 64573,   SH 64753,
    SH 64757,   SH 64527,   SH 68090,   SH 65001,
    SH 65210,   SH 65003,   SH 65016,   SH 65425,
    SH 65010,   SH 65310,   SH 59002,   SH 59003,
    SH 56295,   SH 59089,   SH 51283,  SH 56338,
    SH 56344,   SH 69601,   SH 69602,   SH 69603,
    SH 56509,   SH 66632,   SH 66004,   SH 56382,


    2. Acid cleaning method


    Dissolve potassium dichromate or crystals in water to 60 to 80 degrees, and slowly add concentrated sulfuric acid with a concentration of 94% until sufficient. Add slowly and stir. Add up to 1200 milliliters of potassium sulfate or completely dissolve, and the solution will appear dark red in color. At this time, the rate of adding concentrated sulfuric acid can be accelerated until it is completely added. If there are still undissolved crystals after adding concentrated sulfuric acid, they can be heated until dissolved. The function of cleaning solution is to remove general pollutants, grease, and metal particle impurities on the wall of stainless steel filter cartridge, and it can effectively kill the bacteria and microorganisms that grow on the filter cartridge and damage the heat source. If the filter element has been alkaline washed before, the alkaline solution must be washed first, otherwise fatty acids will precipitate and contaminate the filter element.


    material
    delivery procedure