Shay
Replace Oil Filter Element 0330D010BN3HC
Product Specifications
Huahang
Type
Hydraulic oil filter element
Filter layer
fiberglass
PART NUMBER
0330D010BN3HC
working temperature
-20~+110℃
Filtration accuracy
1~50 micron
Type |
Hydraulic oil filter element |
Filter layer |
fiberglass |
PART NUMBER |
0330D010BN3HC |
working temperature |
-20~+110℃ |
Filtration accuracy |
1~50 micron |
FAQ
A: We can supply samples if we have stock, but customers need to pay for the samples cost and the courier cost first, and we will refund the samples cost on your next order.
1. Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
related part number
Huahang
0160D003BN/HC 0160D005BN/HC 0160D010BN/HC 0160D020BN/HC 0160D003BN3HC 0160D005BN3HC 0160D010BN3HC0160D020BN3HC 0160D003BN4HC 0160D005BN4HC 0160D010BN4HC 0160D020BN4HC 0160D020P 0160D020W
0110R003BNHC 0110R005BNHC 0110R010BNHC 0110R020BNHC
0110R003BN3HC 0110R005BN3HC 0110R010BN3HC 0110R020BN3HC
0110R003BN4HC 0110R005BN4HC 0110R010BN4HC 0110R020BN4HC 2. Acid cleaning method
Dissolve potassium dichromate or crystals in water to 60 to 80 degrees, and slowly add concentrated sulfuric acid with a concentration of 94% until sufficient. Add slowly and stir. Add up to 1200 milliliters of potassium sulfate or completely dissolve, and the solution will appear dark red in color. At this time, the rate of adding concentrated sulfuric acid can be accelerated until it is completely added. If there are still undissolved crystals after adding concentrated sulfuric acid, they can be heated until dissolved. The function of cleaning solution is to remove general pollutants, grease, and metal particle impurities on the wall of stainless steel filter cartridge, and it can effectively kill the bacteria and microorganisms that grow on the filter cartridge and damage the heat source. If the filter element has been alkaline washed before, the alkaline solution must be washed first, otherwise fatty acids will precipitate and contaminate the filter elementSFN-02-60K SFN-02-100K SFN-02-150K SFN-02-200K