Shay
0102030405
Pressure Line Filter DYL24-005W-E3-B5
Product SpecificationsHuahang
Product Attribute |
Specification |
Model |
DYL24-005W-E3-B5 |
Pressure |
12 Mpa |
OD |
Stamdard |
Height |
Standard |
Origin |
Henan,China |
product view
Huahang
selection principle
1. Inlet and outlet diameter: The inlet and outlet diameter of the high-pressure pipeline filter should not be smaller than the inlet diameter of the matching pump, usually consistent with the diameter of the inlet pipeline.
2. Nominal pressure: The pressure rating of the filter should be determined based on the maximum pressure that may occur in the filtering pipeline to ensure that the filter can withstand high-pressure working environments.
3. The selection of pore size: mainly considers the particle size of impurities that need to be intercepted, and is determined according to the process requirements of the medium flow. The more pores there are, the smaller the particle size of impurities that can be intercepted, and the better the filtering effect.
4. Filter material: The material of the filter is generally chosen to be the same as the material of the connected process pipeline. For different service conditions, filters made of cast iron, carbon steel, low-alloy steel, or stainless steel can be considered.
5. Filter resistance loss: The pressure loss of a water filter at the rated flow rate is generally calculated to be 0.52-1.2kpa