Shay
Polymer Candle Filter Element 95x600
Product SpecificationsHuahang
Type |
Polymer melt filter element |
Dimension |
95x600 |
Filter layer |
Metal |
Filtration efficiency |
99.9% |
| Origin | Henan,China |
cleaning METHODHuahang
1. Remove the melt filter from the production equipment and place it in the cleaning tool.
2. Apply cleaning agent to the surface of the melt filter element.
3. Wait for a period of time for the cleaning agent to saturate the filter element and allow dirt to seep out.
4. Pour out the cleaning agent and thoroughly rinse the filter element with clean water until there is no residue on the surface of the filter element.
5. Air dry the filter element or use a hair dryer to thoroughly dry the moisture.
1. Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
The main steps of cleaning the melt filter element include three stages: hydrolysis, pre oxidation, and oxidation.
1. Hydrolysis stage: Start the overheating heater and open the steam valve. Use high-temperature steam as the heat carrier to promote the cracking of the polymer on the surface of the filter element, and reduce the viscosity of the high viscosity melt, so that the melt wrapped around the filter element can become a small particle structure as much as possible. Steam not only serves as a heat carrier, but also acts as a transport medium, carrying away the gases and particles produced by cracking from the filter element.
2. Pre oxidation stage: During this stage, continue to increase the temperature of the superheated heater and keep the steam valve open. First, open one small air valve, and then in the second small step, open two small air valves. Adding a small amount of air to the steam causes a slight oxidation reaction on the surface of the particles. By controlling the concentration of oxygen and gradually increasing the amount of oxygen, the oxidation reaction is made more complete.
3. Oxidation stage: Close the steam valve and two small air valves, and open the large air valve. At this point, the easily reactive small particles in the melt have undergone complete oxidation reactions, while some larger particles have undergone preliminary oxidation reactions on the surface. After increasing the oxygen concentration, the oxidation reaction becomes more complete.
1. Electronics and pharmaceuticals: pre-treatment filtration of reverse osmosis water and deionized water, pre-treatment filtration of detergent and glucose.
2. Thermal power and nuclear power: purification of lubrication systems, speed control systems, bypass control systems, oil for gas turbines and boilers, purification of feedwater pumps, fans, and dust removal systems.
3. Mechanical processing equipment: lubrication systems and compressed air purification for papermaking machinery, mining machinery, injection molding machines, and large precision machinery, as well as dust recovery and filtration for tobacco processing equipment and spraying equipment.