Shay
P-F-VN16A-150W Replace Oil Filter Element
Product SpecificationsHuahang
Part number |
P-F-VN16A-150W |
Filter layer |
F |
Filtration accuracy |
1~50μm |
Filtration efficiency |
99.9% |
features
HUAhANG
1、 Efficient filtration
Fiberglass oil filter element is an efficient filter material based on high-pressure and high-speed airflow characteristics, with strong filtering performance. When using the filter, the filter element will filter out solid particles and impurities in the liquid under the action of oil pressure, while retaining the chemical composition of the oil. This high-efficiency filtering characteristic can maintain good filtering effect of the filter element for a long time, thereby improving the working efficiency and service life of the equipment.
2、 Long lifespan
The long service life of glass fiber oil filter is mainly due to the excellent performance of its material. Fiberglass oil filter material has the characteristics of high strength, corrosion resistance, and high temperature resistance, and can be used in harsh environmental conditions without easy wear or deformation. At the same time, the fiberglass oil filter has the characteristic of being reusable, and regular cleaning can restore the filtering performance of the filter and extend its service life.
3、 Easy to clean
Compared with other types of filters, fiberglass oil filter has the characteristic of easy cleaning. Due to its excellent properties such as high temperature resistance and corrosion resistance, various cleaning methods can be used, such as atmospheric drying, high-temperature drying, and rinsing with clean water.
1. Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
SFG-02-60W
SFT-20-150W
SFT-12-150W
P-GF-A-06-3-3C
P-VN-20,24-150W
P-LCN-6-8C
UH-08A-10UW-IVN
P-351,352-06,08-60W
P-UL,UM-20,24-20U
P-UL-03,04-8CP
UL-10A-8C-V
G-UL-06A-10UW-IV
UL-06A-10U-IVN
UM-12-20U-IVNM
P-COS-L,H-12,16-A-10U
P-FP-2200-W
ISH-16A-150W-EM
P-ISH-16-150W
EA-3
TS-870-1
LCN-12-10-10U-EV
P-LCN-10-10U
P-UL,UM-20,24-40UW
P-UL,UM,UH-10,12-10U
P-UL,UM,UH-06,08-10U
P-UL,UM,UH-10,12-20U
2. Acid cleaning method
Dissolve potassium dichromate or crystals in water to 60 to 80 degrees, and slowly add concentrated sulfuric acid with a concentration of 94% until sufficient. Add slowly and stir. Add up to 1200 milliliters of potassium sulfate or completely dissolve, and the solution will appear dark red in color. At this time, the rate of adding concentrated sulfuric acid can be accelerated until it is completely added. If there are still undissolved crystals after adding concentrated sulfuric acid, they can be heated until dissolved. The function of cleaning solution is to remove general pollutants, grease, and metal particle impurities on the wall of stainless steel filter cartridge, and it can effectively kill the bacteria and microorganisms that grow on the filter cartridge and damage the heat source. If the filter element has been alkaline washed before, the alkaline solution must be washed first, otherwise fatty acids will precipitate and contaminate the filter element.
