Oil Mist Separation Filter Element 115x916

Our oil mist separation filter is designed to effectively remove oil mist particles from compressed air systems, providing cleaner and healthier air for various industrial applications. The filter element is designed to be flexible and can be seamlessly installed into a series of filter housings, making it easy to replace and maintain.

WhatsApp Contact us

Product SpecificationsHuahang

Dimension	115x916
End caps	Nylon
Material	Polyester/Fibric
Middle skeleton	Carbon steel punched plate

Oil Mist Separation Filter Element 115x916 (4)ocy

Oil Mist Separation Filter Element 115x916 (5)njn

Oil Mist Separation Filter Element 115x916 (6)bwt

WORKING PRINCIPLEHuahang

Oil mist separator is a device used to separate oil mist in compressed air. Its working principle is to intercept, adsorb, and condense oil particles in the air through a special fiber layer on the inner side of the filter element, in order to achieve the purpose of separating oil mist.

Specifically, when compressed air enters from the inlet of the oil mist separator, it passes through the inside of the filter element and then flows outward. During this process, oil particles entering the fiber layer will be intercepted by their motion inertia and collide with each other or with multiple layers of fibers, being adsorbed by the fibers. Smaller particles will be absorbed by the fiber, and gradually become liquid as they flow outward, eventually agglomerate on the surface of the special foam plastic layer, flow to the bottom of the cup under the action of gravity and be discharged.

The working principle of the oil mist separator is simple and efficient, which can effectively separate the oil mist in compressed air, improve the quality of compressed air, and ensure the normal operation of the equipment.

MAINTENANCE AND REPLACEMENTHuahang

In order to ensure the normal operation and filtration effect of the oil mist filter element, it is necessary to regularly maintain and replace it. The specific methods are as follows:

1. Maintenance: Regularly clean the dust accumulation on the surface of the filter element, check the degree of damage to the filter element, and replace it in a timely manner if there is any damage.

2. Replacement: When the filtering effect of the filter element decreases, the resistance loss increases, or the service life is reached, the filter element should be replaced in a timely manner. When replacing, the same model and specification of filter element should be selected to ensure the filtering effect.