Non-Woven Fabric Wound Coalescer Filter Element

1. High filtration accuracy: The coalescing filter element can filter the medium with high precision of 1-25 μ m, effectively removing solid impurities and tiny water droplets from the oil.

2. Good agglomeration effect: The specially treated glass fiber layer can significantly improve the agglomeration effect, aggregating small water droplets into larger ones for easy separation.

3. Large sewage capacity and long service life: Due to the use of high-quality materials and precise design, the coalescing separation filter element has a large sewage capacity and long service life, reducing the frequency and cost of replacing the filter element.

4. High flow density: The design of the coalescence separation filter element reduces the size of the fine filter while ensuring a larger flow density, improving the efficiency of the oil dehydration system.

5. Compliant with industry standards: The structure and materials of the coalescence separation filter element meet the standard requirements, ensuring the quality and reliability of the product.

1. Turn off the water source and remove the filter coalescing element

During the cleaning process, it is necessary to dismantle the filter aggregation element, so it is necessary to first turn off the water source and remove the filter installed on the faucet.

2. Clean and filter the coalescing filter element

Rinse the filter cartridge with clean water until the water flow becomes clear and transparent. If there is a lot of dust and dirt, you can gently wipe the surface of the filter element with a soft bristled brush. Do not use deliberate hard washing or scratching to prevent damage to the filter element.

3. Soak and filter the coalescing filter element

Soak the cleaned filter coalescing element in clean water, add an appropriate amount of bleach or vinegar, and soak for generally between half an hour and an hour.

4. Rinse and filter the coalescing filter element again

After soaking, rinse the filter cartridge again until the water flow becomes clear.

5. Repeatedly rinse and filter the coalescing filter element

To achieve better cleaning results, you can repeat steps 2-4 until there are no more residues in the clean water.

6. Install the filter aggregation filter element

After cleaning, reinstall the filter coalescing element onto the faucet and turn on the water source for testing.