Technical Parameter:

1. Import and export diameter:

In principle, the inlet and outlet diameter of the filter should not be smaller than the inlet diameter of the matching pump, generally consistent with the inlet pipeline diameter.

2. Nominal pressure:

Determine the pressure level of the filter according to the maximum pressure that may occur in the filtering pipeline.

3. Selection of hole size:

The main consideration is the particle size of impurities that need to be intercepted, depending on the process requirements of the medium flow. The particle size that can be intercepted by various specifications of silk screens can be found in the table "Filter Screen Specifications".

4. Filter material:

The material of the filter is generally chosen to be the same as the material of the connected process pipeline. For different service conditions, filters made of cast iron, carbon steel, low alloy steel, or stainless steel can be considered.

5. Calculation of filter resistance loss

The water filter has a pressure loss of 0.52-1.2 kPa at the rated flow rate in general calculation

Features:

1. The filtration equipment adopts a patented internal mechanical structure, achieving a true high-pressure backwash function. It can easily and thoroughly remove impurities intercepted by the filter, clean without dead corners, and ensure no flux attenuation, ensuring filtration efficiency and long-term service life.

2. The stainless steel filter adopts 304 and 316L stainless steel wedge-shaped filters, which have high strength, accuracy, corrosion resistance, and a maximum filtration accuracy of 25 microns.

3. Stainless steel filters achieve automatic backwashing through their own retrieval and strain functions, which can cope with unstable water quality fluctuations without the need for manual intervention.

4. Stainless steel filters have fewer vulnerable parts, no consumables, low operating and maintenance costs, and simple operation and management.

5. The stainless steel filter operates accurately and can flexibly adjust the backwash pressure difference time and time setting value according to different water sources and filtration accuracy.

6. During the backwashing process of stainless steel filters, each filter screen (group) undergoes backwashing operation in sequence; Ensure that the filter is cleaned safely and efficiently, while other filters are not affected, and continue filtering.

7. The stainless steel filter adopts a pneumatic drain valve, which has a short backwash time, low backwash water consumption, and is environmentally friendly and economical.

8. The stainless steel filter has a compact and reasonable structural design, with a small footprint and flexible and convenient installation and movement.