M60x2-6g External Thread Sintered Powder Filter Element

The filter element is made of high-quality materials that are corrosion-resistant and wear-resistant, providing long-lasting filtration performance even under harsh operating conditions. The sintered powder material used in the component structure ensures reliable filtration of pollutants such as dust, dirt, and debris, thereby ensuring the cleanliness and quality of the process fluid.

Type Sintered Powder Filter Element
Dimension 80x330
Filter media Stainless steel
Filtration accuracy 1~25μm
Interface M60x2-6g External Thread
Package Neutral
Custom made Avaliable

WhatsApp Contact us

Product SpecificationsHuahang

Working temperature	-20~+110℃
Filter layer	Stainless steel
Type	Sintered powder filter element
Interface	M60x2-6g External Thread
Package	Neutral package

FeaturesHuahang

2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;

3. The design adopts a metal folding frame, which can be reused and replaced;

4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;

Special design can achieve an effective filtration area of 100%;

2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;

3. The design adopts a metal folding frame, which can be reused and replaced;

4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;

High temperature resistance: The powder sintered filter element can work normally below 900 degrees Celsius and has high temperature resistance performance.

Good chemical stability: able to resist acid and alkali, suitable for a large pH range, and will not undergo chemical reactions with the medium.

High mechanical strength: The filter element has high mechanical strength and accuracy, uniform pore size distribution, and high separation efficiency.

Strong antimicrobial ability: does not interact with microorganisms and can effectively prevent microbial contamination.

No micro material detachment: There will be no micro material detachment during use, and it will not cause secondary pollution to the medium.

Good backwash effect: easy to regenerate, good backwash effect, can extend service life

1. Efficient filtration: Fiberglass filters have very small pore sizes, which can filter out small particles and impurities in water, greatly improving water quality.

2. Chemical corrosion resistance: Fiberglass filters have characteristics such as acid resistance, alkali resistance, and high temperature resistance, and can also be used normally in chemical environments.

3. Long service life: Fiberglass filters usually have a longer service life than ordinary filters, usually reaching more than six months.

4. Easy to maintain: The maintenance of fiberglass filter is relatively simple, only requiring regular cleaning or replacement, and the maintenance cost is relatively low.

problem and solutionsHuahang

1. The powder sintered filter element is the core part of the filter. The powder sintered filter element is composed of special materials and is a vulnerable part that requires special protection and maintenance.

2. After the filter in the system has been working for a period of time, the powder sintered filter element in the filter has intercepted a certain amount of pollutants and impurities. At this time, the pressure increases, the flow rate gradually decreases, and the transmitter will remind the alarm. At this time, it is necessary to clean the impurities in the powder sintered filter element in a timely manner, and the powder sintered filter element needs to be cleaned.

3. During the process of cleaning the powder sintered filter element, we must be careful not to deform or damage it. Otherwise, it cannot be used again to avoid affecting the filtration efficiency and causing damage to the entire system.

Appearance quality issue: There may be large areas of yellow or rust spots on the surface of the titanium rod sintered filter element. The reason for these problems is the uneven distribution of carbon content on the surface of the filter element, usually caused by the introduction of carbon elements into titanium tetrachloride during the production process. The solution includes using ultrasonic cleaning or chemical cleaning (such as acid washing or alkali washing) to remove surface contaminants.

Installation and sealing issues: During installation, it is necessary to ensure that the filter element is installed vertically and check whether each sealing ring is in place to avoid missing or misplaced sealing rings. After installation, there should be a 15 to 20 minute cleaning and inspection process, using circulating water to clean until the inspection is qualified.

Working pressure control: The normal working pressure should be controlled between 0.15 and 0.25 Mpa, and the working differential pressure should be controlled below 0.45 Mpa. If the pressure exceeds this value, timely backwashing or backwashing operations should be carried out to maintain the filtration efficiency of the filter core.

Anti cleaning and maintenance: It is recommended to perform a backwash before the end of each shift, with a backwash time of 10 to 20 minutes each time. The backwash pressure should be gradually increased to 0.25 to 0.3 Mpa. When the filter element is severely clogged, ultrasonic cleaning, acid washing, alkali washing and other methods can be used

1. Home: Fiberglass filter is suitable for water purifiers, water dispensers, and other equipment in homes. It can filter out small particles, residual chlorine, odors, and other pollutants in water, improving the quality of drinking water.

2. Industry: Fiberglass filters are widely used in industrial fields such as water treatment, wastewater treatment, and high-purity water preparation, and can remove various pollutants from water.

3. Medical: Fiberglass filters are also suitable for use in the medical field, such as operating room purification and laboratory water purification in hospitals.