Laminated Polyester Fabric Filter Element 250x245

• 1. Select synthetic high-strength polyester long fiber non-woven fabric material, whose fibers are smooth tubular, intersecting with each other, with smaller openings and more uniform distribution, and have good filtration performance

  
  

  2. The application of polyester long fiber filter material enables the filter cartridge to not only have good acid and alkali resistance, but also higher filtration efficiency and lower operating resistance

  
  

  3. The tough and durable polyester filter material is combined with a corrosion-resistant steel mesh support structure. The new open folding design increases the effective filtering area and allows airflow to pass through the surface steadily and unobstructed.

  
  
  

1. Manual cleaning method

The manual cleaning method is the most commonly used cleaning method, and the specific steps are as follows:

(1) Remove the filter element and soak it in clean water for about ten minutes.

(2) Dip a brush or soft cloth in cleaning solution and gently wipe the filter element.

(3) Rinse thoroughly with clean water.

(4) Place the filter element in a ventilated and dry place to air dry.

2. Mechanical cleaning method

Mechanical cleaning method is a method of using machines for cleaning, generally applicable to large industrial equipment. The specific steps are as follows:

(1) Remove the filter element and place it in the machine cleaning tank.

(2) Open the machine for cleaning.

(3) After cleaning, remove the filter element and thoroughly rinse it with clean water.

(4) Place the filter element in a ventilated and dry place to air dry.