Shay
Hydraulic Oil Filter Element 80x170
Product SpecificationsHuahang
Type |
Hydraulic Oil Filter Element |
Filter layer |
Fiberglass |
Filtration accuracy |
1~50μm |
Working temperature |
-20~+100℃ |
ADVANTAGES
HUAhANG
Efficient filtration: Fiberglass filter cartridges have high filtration efficiency and precision, capable of filtering out small particles and pollutants.
Corrosion resistance: Fiberglass filter cartridges have excellent corrosion resistance and can be used in harsh environments such as acid, alkali, and organic solvents.
High temperature resistance: Fiberglass filter cartridges can be used in high temperature environments and have good heat resistance.
Long lifespan: Fiberglass filter cartridges have a long service life and are not easily aged or deformed.
1. Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
packing & ShippingHuahang
1.Plastic bags inside; carton outside ;wooden cases for transport.
2.Transshipment by sea and air and other you can request.
3.Ports of shipment as your requirments.
1. What harm can inferior hydraulic oil filter elements cause to equipment?
When hydraulic oil enters the hydraulic system for operation, cleanliness is the primary issue. Poor quality hydraulic oil filter cartridges have poor filtration effects and cannot effectively prevent dirt and other debris from entering the system. If tiny debris particles enter the hydraulic system, they can scratch the pump, get stuck in valves, block oil ports, and cause machine malfunctions.
2. The quality of hydraulic oil filter element plays a crucial role in the performance of equipment.
For fully hydraulic excavators, the hydraulic system is distributed throughout the entire excavator, including hydraulic oil tanks, main pumps, control valves, various pipelines, and components such as oil cylinders and motors that perform various actions. These hydraulic components are precision machined and require high maintenance of the hydraulic system. Therefore, the quality of the hydraulic oil filter is crucial.
3. How to determine if hydraulic components are damaged by regularly inspecting and replacing hydraulic oil filters?
When replacing the hydraulic oil filter element, please check if there are metal particles or debris at the bottom of the filter element. If there are copper or iron debris, it indicates that the hydraulic pump, hydraulic motor or valve may be damaged or about to be damaged. If there is rubber, it indicates that the hydraulic cylinder seal is damaged.
2. Acid cleaning method
Dissolve potassium dichromate or crystals in water to 60 to 80 degrees, and slowly add concentrated sulfuric acid with a concentration of 94% until sufficient. Add slowly and stir. Add up to 1200 milliliters of potassium sulfate or completely dissolve, and the solution will appear dark red in color. At this time, the rate of adding concentrated sulfuric acid can be accelerated until it is completely added. If there are still undissolved crystals after adding concentrated sulfuric acid, they can be heated until dissolved. The function of cleaning solution is to remove general pollutants, grease, and metal particle impurities on the wall of stainless steel filter cartridge, and it can effectively kill the bacteria and microorganisms that grow on the filter cartridge and damage the heat source. If the filter element has been alkaline washed before, the alkaline solution must be washed first, otherwise fatty acids will precipitate and contaminate the filter element.
