Shay
HHYL65752LZ Oil Filter Element
Product Specifications
Huahang
Part number
HHYL65752LZ
Filter layer
filter paper
Filtration accuracy
1~50μm
Working temperature
-20—+110℃
Package
Neutral
Part number |
HHYL65752LZ |
Filter layer |
filter paper |
Filtration accuracy |
1~50μm |
Working temperature |
-20—+110℃ |
Package |
Neutral |
faq
HUAhANG
1. Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
note
Huahang
1. Installation direction: The installation direction of the paper oil filter is very important. If installed in reverse, although it will not affect the start of the car, it will cause a decrease in oil pressure, affect the filtering effect of the oil, and thus increase fuel consumption.
2. Cleaning and replacement: Paper filter cartridges cannot be cleaned with water because once cleaned with water, the filter paper will deform and lose its original filtering efficiency. The correct cleaning method is to use a clean soft brush to gently brush along the folds of the filter element to remove surface dust, and then use tapping to generate vibration to remove internal dust.
3. Sealing: When replacing the oil filter element, whether it is a paper or iron filter, it is necessary to ensure that they are tightened correctly. For paper filters, the filter base should be cleaned before replacement, and oil should be applied to the new filter sealing ring to ensure good sealing effect.
4. Operating environment: Due to its material characteristics, paper filter cartridges can increase air intake resistance and affect their service life once they become damp. Therefore, the air filter should be avoided from coming into contact with rainwater, and water should also be avoided from splashing onto the paper filter when washing the car.
5. Regular replacement: With the extension of use time, impurities will gradually accumulate on the filter element of the air filter, causing an increase in air resistance, which in turn affects the intake efficiency and power output of the engine. Therefore, it is crucial to regularly replace or clean the air filter
0110R003BNHC 0110R005BNHC 0110R010BNHC 0110R020BNHC
0110R003BN3HC 0110R005BN3HC 0110R010BN3HC 0110R020BN3HC
0110R003BN4HC 0110R005BN4HC 0110R010BN4HC 0110R020BN4HC 2. Acid cleaning method
Dissolve potassium dichromate or crystals in water to 60 to 80 degrees, and slowly add concentrated sulfuric acid with a concentration of 94% until sufficient. Add slowly and stir. Add up to 1200 milliliters of potassium sulfate or completely dissolve, and the solution will appear dark red in color. At this time, the rate of adding concentrated sulfuric acid can be accelerated until it is completely added. If there are still undissolved crystals after adding concentrated sulfuric acid, they can be heated until dissolved. The function of cleaning solution is to remove general pollutants, grease, and metal particle impurities on the wall of stainless steel filter cartridge, and it can effectively kill the bacteria and microorganisms that grow on the filter cartridge and damage the heat source. If the filter element has been alkaline washed before, the alkaline solution must be washed first, otherwise fatty acids will precipitate and contaminate the filter element.
