Shay
CST71005 Air Compressor Filter Element
Product SpecificationsHuahang
Part number |
CST71005 |
Filtration efficiency |
99.9% |
Material |
Fiberglass |
Filtration accuracy |
1~25μm |
NOTEHuahang
Choose the appropriate filter element: Ensure to choose a filter element that matches the air compressor model, which involves parameters such as filter size, filtration accuracy, and flow rate. Incorrect filter selection may result in poor filtration efficiency and even damage to the air compressor.
Safe operation: Before replacing the filter element, make sure that the air compressor has been shut down and the power supply has been disconnected to prevent personal injury caused by accidental start-up. At the same time, protective equipment such as gloves and goggles should be worn during operation.
Drain old engine oil: If the oil filter element is replaced, the drain valve needs to be opened to drain the old engine oil completely. During the discharge process, attention should be paid to safety to avoid oil splashing and injuring people or polluting the environment.
Cleaning work: After disassembling the old filter element, the filter element seat and surrounding area should be cleaned to ensure that there is no residue or dirt. This helps the new filter to work better and extend its lifespan.
Correct installation: When installing a new filter element, make sure it is securely installed without any looseness or leakage. If the filter element requires a fixing device (such as bolts or buckles), please install it according to the manufacturer's instructions.
Add new engine oil: If replacing the oil filter element, it is necessary to add new engine oil according to the specified type and amount of oil. Ensure that the oil level is within the normal range to avoid damage to the air compressor caused by excessive or insufficient oil.
Inspection and testing: After the replacement is completed, start the air compressor and check its operation. Observe the oil level, filter operation, and whether there are any leaks or abnormal phenomena.
Cleaning the site: After completing the replacement, clean the work area to ensure that there are no missing tools or materials. Meanwhile, dispose of the old filter element and engine oil properly, following local environmental regulations.
Related modelsHuahang
.
