Shay
20μm Stainless Steel Oil Filter Element 34x87
Product SpecificationsHuahang
Filtration accuracy |
20μm
|
Filter layer |
Stainless steel |
Dimension |
34x87 |
Custom made |
Avaliable |
features
HUAhANG
Strong corrosion resistance: Stainless steel has good corrosion resistance and can work stably in various harsh environments, maintaining its filtration performance for a long time.
Good high temperature resistance: Stainless steel material has good high temperature performance and can be used normally in high temperature environments without softening or embrittlement.
High strength: Stainless steel material has high strength, can withstand large pressure and extrusion force, and is not easily deformed or broken.
Lightweight: Compared to other types of filter cartridges, stainless steel filter cartridges are lighter in weight and easy to handle and replace.
Good cleaning performance: The stainless steel filter element has good cleaning performance and can be repeatedly cleaned and reused, reducing the cost of use and maintenance.
Long lifespan: Due to the strong corrosion resistance, high temperature resistance, and high strength of stainless steel material, its lifespan is relatively long, which can greatly reduce the frequency and cost of replacing the filter element.
1. Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
Q1: What is the lifespan of this oil filter element?
A1: The lifespan of this oil filter depends on the usage environment and conditions, but generally speaking, its lifespan can range from 1 to 6 months during use.
Q2: What should be noted when replacing the oil filter element?
A2: When replacing the oil filter element, it is necessary to strictly follow the manufacturer's requirements for operation. Firstly, it is necessary to shut down the oil circuit of the machine or equipment, then remove the old oil filter element and clean the filter housing. Next, install the new oil filter element, initialize the equipment, and start it.
Q3:How is this oil filter cleaned and maintained?
A3: This oil filter can be maintained by cleaning or replacing it. Before cleaning the oil filter element, please pay attention to closing the oil circuit of the corresponding machine or equipment, removing the old oil filter element, cleaning the filter housing, and replacing the new oil filter element. Special cleaning agents are required, and cleaning should be carried out according to the manufacturer's instructions to ensure sufficient drying before use.
2. Acid cleaning method
Dissolve potassium dichromate or crystals in water to 60 to 80 degrees, and slowly add concentrated sulfuric acid with a concentration of 94% until sufficient. Add slowly and stir. Add up to 1200 milliliters of potassium sulfate or completely dissolve, and the solution will appear dark red in color. At this time, the rate of adding concentrated sulfuric acid can be accelerated until it is completely added. If there are still undissolved crystals after adding concentrated sulfuric acid, they can be heated until dissolved. The function of cleaning solution is to remove general pollutants, grease, and metal particle impurities on the wall of stainless steel filter cartridge, and it can effectively kill the bacteria and microorganisms that grow on the filter cartridge and damage the heat source. If the filter element has been alkaline washed before, the alkaline solution must be washed first, otherwise fatty acids will precipitate and contaminate the filter element.
