P581465 Replace Oil Filter Element
Product SpecificationsHuahang
Part number |
P581465 |
Filter layer |
Fiberglass + Spray screen |
End caps |
Plastic |
Filtration accuracy |
10μm |
![P581465 Replace Oil Filter Element(1)5o5](https://ecdn6.globalso.com/upload/p/153/image_other/2024-06/p581465-replace-oil-filter-element-1-1.png)
![P581465 Replace Oil Filter Element (2)yqc](https://ecdn6.globalso.com/upload/p/153/image_other/2024-06/p581465-replace-oil-filter-element-2-1.png)
![P581465 Replace Oil Filter Element(5)42n](https://ecdn6.globalso.com/upload/p/153/image_other/2024-06/p581465-replace-oil-filter-element-5.jpg)
Replace METHODSHuahang
1. The oil and oil filter should be replaced simultaneously, which is beneficial for extending the service life of the engine.
2. When disassembling the oil filter, a filter wrench or appropriate tool should be used to prevent damage to the threads of the connecting parts.
3. Do not tighten the filter too tightly to prevent damage to the sealing gasket.
4. After replacing and installing the gasoline and oil compartments, pay attention to the tightness of the interfaces and be alert to oil leaks.
5. When replacing gasoline filters or repairing gasoline systems, smoking or using open flames is prohibited.
6. When replacing the gasoline filter, the engine must be cold because the high-temperature exhaust gas discharged from the exhaust pipe when the engine is hot can ignite the fuel.
7. The filter has markings for the inlet and outlet ports, so do not install it upside down when replacing it.
Q: How do I know if my oil filter element needs to be replaced?
Answer: Signs that may require replacing the oil filter element include decreased engine performance, abnormal engine noise, or dirty or discolored oil.
Can I replace the oil filter element myself?
Answer: Yes, replacing the oil filter element is a relatively simple and direct process that most car owners can use basic tools to complete. However, if you are unsure how to replace the oil filter element, it is recommended that you consult the vehicle owner's manual or seek the help of a professional mechanic.
P551318,P552603,P551421,
P551423,P551424,P502143,
P502458,P550060,P556745,
P502085,P550105,P550958,
P550120,P550959,P556915,
P556916,P550345,P550860,
P550057,P550032,P550587,
P550588,P502116,P551313,
P550106,P555095,P550690,
P556245,P550401,P550399,
P553004,P550928,P550936,
P551605,P502163,P550012,
EA027
EA079
EA087
EA447
EA448
EA547
EA697
EA740
EA752
ED349
EK160
EA1059
EA1392
EA1528
EA1688
EA1761
EA1814
EA2040
EA610A
EZ1632
EZ1633
EZ1635
EZ1654
EZ1912
Our serviceHuahang
Note
When the oil temperature is greater than 10 ℃, the wind turbine operates.
When the oil temperature is 40 ℃ and the pressure difference between the inlet and outlet of the filter exceeds 3 bar, the pressure difference sends a signal
The device emits an alarm signal, prompting the replacement of the filter element. When the oil temperature is ≤ 40 ℃, ignore the pressure
The alarm signal transmitted by the differential transmitter.
When the oil temperature exceeds 55 ℃, the oil flows through the cooler for cooling, and when the oil temperature drops to
At 45 ℃, oil flows directly into the gearbox.
Pump outlet pressure sensor or pressure gauge, used to detect the pressure of the system, system
The safety valve is set to a pressure of 12 bar. When the detected pressure exceeds 12 bar, the safety valve
The valve opens and the system overflows.
![Delivery Procedure](https://ecdn6.globalso.com/upload/p/153/image_other/2024-04/662225ccade4938666.jpg)
![Services avaliable](https://ecdn6.globalso.com/upload/p/153/image_other/2024-04/6625f95be3d1578453.jpg)