NGGC336 Natural Gas Filter Element
Product SpecificationsHuahang
Part number |
NGGC336 |
End caps |
Carbon steel |
Outer skeleton |
δ0.8 Φ6 punched plate |
Filter layer |
Fiberglass/Paper |
![NGGC336 Natural Gas Filter Element (6)6ca](https://ecdn6.globalso.com/upload/p/153/image_other/2024-06/nggc336-natural-gas-filter-element-6.jpg)
![NGGC336 Natural Gas Filter Element (8)ggz](https://ecdn6.globalso.com/upload/p/153/image_other/2024-06/nggc336-natural-gas-filter-element-8.jpg)
![NGGC336 Natural Gas Filter Element (5)pwd](https://ecdn6.globalso.com/upload/p/153/image_other/2024-06/nggc336-natural-gas-filter-element-5.jpg)
FeaturesHuahang
Q2. What are the maintenance techniques for natural gas filter cartridges?
A2: It is important to regularly check the filter for signs of damage and replace it if necessary to ensure optimal performance. It is also recommended to regularly clean the filter housing to remove any accumulated debris or pollutants. Please make sure to follow the manufacturer's instructions for maintenance and replacement of the filter element.
Q3. What are the benefits of using natural gas filters?
A3: The use of natural gas filters helps prevent damage to gas equipment, reduce maintenance costs, and extend the service life of such equipment. It also helps to ensure higher combustion efficiency of natural gas, thereby improving fuel economy.
replacement processHuahang
1. Close the natural gas valve to prevent gas leakage.
2. Open the exhaust hole and discharge the waste in the pipeline.
3. Check to ensure that there are no more dirt in the pipeline.
4. Use a wrench or other tool to open the filter cartridge housing.
5. Remove the original filter element, taking care not to damage the pipeline or connecting threads.
6. Clean the outer shell of the filter element, check the position and wear of the sealing ring.
7. Apply an appropriate amount of lubricant to the filter housing (lubricant is not required for initial installation).
8. Install a new gas filter element, paying attention to the correct placement of the front and back sides of the filter element and the sealing ring.
9. Secure the filter element and slowly open the natural gas valve, taking care not to cause overcurrent.
Check for leaks by using a spray can or listening to the sound of airflow.