E5-24F E7-24F E9-24F Precision Filter Element

These filters are designed to exceed industry standards and aim to provide excellent filtration capabilities, helping to protect sensitive equipment from contamination and damage. These three options all use advanced filtering media and high-quality structures, which can provide impressive filtration efficiency, resulting in cleaner fluids and better system performance.

Product Details

Product SpecificationsHuahang

Part number	E5-24F E7-24F E9-24F
Filter layer	Fiberglass/Sponge
Maximum working temperature	-30~+110℃
Entrance and exit caliber	5~80 mm
End caps	Male double O-ring

E5-24F E7-24F E9-24F Precision Filter Element (7)oys

E5-24F E7-24F E9-24F Precision Filter Element (8)zlw

E5-24F E7-24F E9-24F Precision Filter Element (1)kaz

AdvantagesHuahang

1. Precision filter element permeability

The filter element adopts American strong hydrophobic and oil repellent fiber filter material, and adopts a framework with good permeability and high strength to reduce the resistance caused by passing.

2. Precision filter element efficiency

The filter element adopts German fine perforated sponge, which can effectively prevent oil and water from being carried away by high-speed airflow, allowing small oil droplets that pass by to accumulate at the bottom of the filter element sponge and discharge towards the bottom of the filter container.

3. Precision filter element airtightness

The connection point between the filter element and the filter shell adopts a reliable sealing ring, ensuring that the airflow is not short circuited and preventing impurities from directly entering the downstream without passing through the filter element.

4. Corrosion resistance of precision filter element

The filter element adopts a corrosion-resistant reinforced nylon end cover and a corrosion-resistant filter element skeleton, which can be used in harsh working conditions.

APPLICATION AREAHUAHANG

1.Aviation fuel, gasoline, kerosene, diesel

2.Liquefied petroleum gas, stone tar, benzene, toluene, xylene, cumene, polypropylene, etc

3.Steam turbine oil and other low-viscosity hydraulic oils and lubricants

4.Cycloethane, isopropanol, cycloethanol, cycloethanone, etc

5.Other hydrocarbon compounds

FAQHuahang

Q: How often do precision filters need to be replaced?

Answer: The frequency of replacing precision filters depends on the specific application and the level of impurities in the filtered fluid. It is recommended to inspect and replace the filter element according to the manufacturer's recommendations.

Q: Can precision filter cartridges be cleaned and reused?

Answer: Some precision filters are designed for cleaning and reuse, while others are designed for one-time use and must be replaced after each filtration process.

Q: Do you need to take any safety precautions when handling precision filters?

Answer: Precision filter cartridges should be handled with care, and appropriate protective equipment should be worn during installation and disassembly. It is also recommended to follow appropriate disposal procedures for used filter cartridges.