Custom Pool Water Filter Element 156×300
Product SpecificationsHuahang
End caps |
PU |
Inner Skeleton |
Plastic |
Dimension |
156x300 |
Filter layer |
Non woven fabric |
MAINTeNANCE METHODHuahang
1. Filtering the filter element will leave dirt on it. It is recommended to remove it for cleaning within 2-3 days. Or replace the filter element with each water change.
2. During the cleaning process, sprinkle some salt on the paper, then soak it in clean water for about 30 minutes, and rinse it thoroughly with water.
3. If there is dirt inside the paper, gently wipe it with your fingers or a fiber cloth. Do not damage or pull out the paper.
4. It is recommended to prepare several more for daily use, so that they can be used alternately to extend the service life of the paper filter.
1. A single filter element has a high flow rate, and the medium with high flow rate passes through the filter material, effectively reducing pressure damage, and has a special filtering material.
2. The filter element can be divided into two filtering methods: external inlet and internal outlet, making it more widely used.
3. Flexible installation and low installation cost.
4. It is washable, reduces costs, and has low operating costs.
1. Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
faq
Huahang
Q1. How often should I replace the swimming pool filter?
A1: The frequency of replacing filter cartridges may vary, depending on the amount of swimming pool usage and the level of debris and pollutants in the water. As a general rule of thumb, you should replace the filter element every 1-2 years.
Q2. Can the swimming pool water filter be cleaned?
A2: Yes, the swimming pool filter element can be cleaned by rinsing with a garden hose or soaking in a cleaning solution. However, please be sure to follow the manufacturer's cleaning instructions, as damaging the filter cartridge can reduce its effectiveness.
Q3. What size of swimming pool water filter cartridge do I need?
A3: The size of the filter you need will depend on the size of the water tank and the flow rate of the pump. For optimal results, please consult a professional or refer to the manufacturer's guide to determine the appropriate size.