Shay
304 Stainless Steel Filter Element 20x123
Product SpecificationsHuahang
Filtration accuracy |
1~25μm
|
Filter layer |
304 Stainless steel |
Dimension |
20x123 |
Custom made |
Avaliable |
features
HUAhANG
Strong corrosion resistance: Stainless steel has good corrosion resistance, can work stably in various harsh environments, and can maintain its filtration performance for a long time.
Good high-temperature resistance: Stainless steel material has good high-temperature performance and can be used normally in high-temperature environments without softening or embrittlement.
High strength: Stainless steel material has high strength, can withstand large pressure and extrusion force, and is not easy to deform or break.
Lightweight: Compared to other materials of filters, stainless steel filters have a lighter weight and are easy to handle and replace.
Good cleaning performance: The stainless steel filter element has good cleaning performance, which can be repeatedly cleaned and reused, reducing the cost of use and maintenance.
Long lifespan: Due to the strong corrosion resistance, high temperature resistance, and high strength advantages of stainless steel material, its lifespan is relatively long, which can greatly reduce the frequency and cost of replacing filter elements.
1. Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
Working principleHuahang
1. During installation, it should be noted that stainless steel filter cartridges are usually vertically fixed on the wall. Therefore, during the installation process, it is necessary to pay attention to the height and fixing method of the installation position to ensure stable installation and facilitate subsequent replacement of the filter cartridge.
2. Replacement interval for filter element: The filter element of the stainless steel filter element needs to be replaced regularly to ensure the filtering effect. It is usually recommended to replace the filter element once a month and adjust the replacement time appropriately based on the water usage in the household.
3. Cleaning the filter: The mesh structure inside the filter element needs to be cleaned regularly to ensure that the filter holes are not blocked. When cleaning, be careful not to apply too much force to avoid damaging the filter structure.
2. Acid cleaning method
Dissolve potassium dichromate or crystals in water to 60 to 80 degrees, and slowly add concentrated sulfuric acid with a concentration of 94% until sufficient. Add slowly and stir. Add up to 1200 milliliters of potassium sulfate or completely dissolve, and the solution will appear dark red in color. At this time, the rate of adding concentrated sulfuric acid can be accelerated until it is completely added. If there are still undissolved crystals after adding concentrated sulfuric acid, they can be heated until dissolved. The function of cleaning solution is to remove general pollutants, grease, and metal particle impurities on the wall of stainless steel filter cartridge, and it can effectively kill the bacteria and microorganisms that grow on the filter cartridge and damage the heat source. If the filter element has been alkaline washed before, the alkaline solution must be washed first, otherwise fatty acids will precipitate and contaminate the filter element.
