Shay
Pool Water Filter Element 185x750
Product SpecificationsHuahang
End caps |
Blue PU |
Inner Skeleton |
Plastic |
Dimension |
185x750 |
Filter layer |
Fabric/Filter paper |
MAINTeNANCE METHODHuahang
1. Filtering the filter element will leave dirt on it. It is recommended to remove it for cleaning within 2-3 days. Or replace the filter element with each water change.
2. During the cleaning process, sprinkle some salt on the paper, then soak it in clean water for about 30 minutes, and rinse it thoroughly with water.
3. If there is dirt inside the paper, gently wipe it with your fingers or a fiber cloth. Do not damage or pull out the paper.
4. It is recommended to prepare several more for daily use, so that they can be used alternately to extend the service life of the paper filter.
1. A single filter element has a high flow rate, and the medium with high flow rate passes through the filter material, effectively reducing pressure damage, and has a special filtering material.
2. The filter element can be divided into two filtering methods: external inlet and internal outlet, making it more widely used.
3. Flexible installation and low installation cost.
4. It is washable, reduces costs, and has low operating costs.
1. Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
Washing methodHuahang
1. Remove the filter cartridge: First, remove the filter cartridge from the baby swimming pool and soak it in the pool water (this step can be ignored for pools without a filter cartridge). Then, discharge the water from the pool to the minimum amount that can be circulated, with the water level 1-2cm higher than the return port.
2. Cleaning the filter element: Turn on functions such as circulation, surfing, and bubbling, and evenly pour the Blue Shield pipeline cleaning agent into the swimming pool, while raising the water temperature to 40 ℃. Maintain a constant temperature cycle of 40 ℃ for 3 hours, with the bubble function turned on for 5 minutes, stopped for 10 minutes, and operated continuously for half an hour. After all the dirty things are discharged from the water surface, drain the water and clean the swimming pool.
3. Add new water: Add new water to the lowest circulating water level, start the circulation for one hour, rinse off impurities and dirty water, then add new water twice continuously, raise the water temperature to 35-40 ℃, maintain circulation, and drain the dirty water.
4. Cleaning the filter element: After draining the water, rinse the filter element with clean water, especially inside the filter. After ensuring that the inside of the pool and pipes are cleaned thoroughly, new water can be added for normal use.
5. Precautions: For the cleaning of the filter element, attention should be paid not to use pressure water guns, hard brushes, steel wire balls, etc. to prevent damage, fuzzing, and large gaps on the paper or non-woven fabric of the filter element, which may affect the filtering effect of the filter element. When it is found that the filter element has obvious yellowing, blackening, deformation, or there is a lot of adsorbed material on the filter element, it should be replaced in a timely manner. If it is found that the water still turns yellow or green after replacing the filter element, the swimming pool pipes should be cleaned.