Custom Pool Water Filter196x780
Product SpecificationsHuahang
End caps |
Blue PU |
Inner Skeleton |
Plastic |
Dimension |
196x780 |
Filter layer |
Fibric/Filter paper |
Working principleHuahang
The working principle of the swimming pool water filter is mechanical filtration. When water passes through the filtering medium, particles will be physically captured. The filter media used in these components are typically composed of porous materials that allow water to pass through while capturing particles.
The main filtering medium used in the swimming pool filter is cylindrical filtration, which is very effective in removing impurities and maintaining water clarity. The cylindrical filter has a larger surface area compared to its size, allowing it to capture more dirt and debris than other filter types.
1. A single filter element has a high flow rate, and the medium with high flow rate passes through the filter material, effectively reducing pressure damage, and has a special filtering material.
2. The filter element can be divided into two filtering methods: external inlet and internal outlet, making it more widely used.
3. Flexible installation and low installation cost.
4. It is washable, reduces costs, and has low operating costs.
1. Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
NOTEHuahang
1. Filtering the filter element will leave dirt on it. It is recommended to remove it for cleaning within 2-3 days. Or replace the filter element with each water change.
2. During the cleaning process, sprinkle some salt on the paper, then soak it in clean water for about 30 minutes, and rinse it thoroughly with water.
3. If there is dirt inside the paper, gently wipe it with your fingers or a fiber cloth. Do not damage or pull out the paper.
4. It is recommended to prepare several more for daily use, so that they can be used alternately to extend the service life of the paper filter.